Month: October 2014

How to fix a malfunction speedometer for your 2012 Hyosung GV650 Aquila Pro

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2012 Hyosung GV650 Aquila Pro.

Step 1: stop your 2012 Hyosung GV650 Aquila Pro at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2012 Hyosung GV650 Aquila Pro: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2012 Hyosung GV650 Aquila Pro.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2012 Hyosung GV650 Aquila Pro. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2012 Hyosung GV650 Aquila Pro and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2012 Hyosung ST7

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2012 Hyosung ST7.

Step 1: stop your 2012 Hyosung ST7 at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2012 Hyosung ST7: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2012 Hyosung ST7.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2012 Hyosung ST7. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2012 Hyosung ST7 and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung GT650R

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung GT650R .

Step 1: stop your 2013 Hyosung GT650R at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung GT650R : pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung GT650R .

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung GT650R . Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung GT650R and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2012 Hyosung ST-E3 EVA Scooter

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2012 Hyosung ST-E3 EVA Scooter.

Step 1: stop your 2012 Hyosung ST-E3 EVA Scooter at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2012 Hyosung ST-E3 EVA Scooter: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2012 Hyosung ST-E3 EVA Scooter.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2012 Hyosung ST-E3 EVA Scooter. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2012 Hyosung ST-E3 EVA Scooter and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung GT650

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung GT650 .

Step 1: stop your 2013 Hyosung GT650 at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung GT650 : pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung GT650 .

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung GT650 . Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung GT650 and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung GT250

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung GT250.

Step 1: stop your 2013 Hyosung GT250 at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung GT250: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung GT250.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung GT250. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung GT250 and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung GT250R

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung GT250R .

Step 1: stop your 2013 Hyosung GT250R at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung GT250R : pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung GT250R .

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung GT250R . Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung GT250R and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung ST7

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung ST7.

Step 1: stop your 2013 Hyosung ST7 at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung ST7: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung ST7.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung ST7. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung ST7 and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung ST7 Deluxe

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung ST7 Deluxe.

Step 1: stop your 2013 Hyosung ST7 Deluxe at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung ST7 Deluxe: pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung ST7 Deluxe.

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung ST7 Deluxe. Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung ST7 Deluxe and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.

How to fix a malfunction speedometer for your 2013 Hyosung GV650 Aquila Pro

Speedometer of motorcycle is a really simple part or it is simpler than what you thought it will be. It consists of a speedometer gauge, a speedometer cable and a fitting on the wheel hub. If you have an electrical speedometer, you have to have it check and repaired by professionals. If not, the most common problem of the speedometer is that in speedometer cable or gauge. In this article, we will tell you how to fix a malfunction speedometer for your 2013 Hyosung GV650 Aquila Pro .

Step 1: stop your 2013 Hyosung GV650 Aquila Pro at a flat ground and stabilized it with the kickstand or a repair stand if you have one. Loosen the fitting that connects the lower end of the speedometer cable to the hub with an electric wrench.

Step 2: check the cable of your 2013 Hyosung GV650 Aquila Pro : pull the end of the cable out of the hub and check to see if it is good. If the end of the cable is broken or the edge of it is rounded, then you need to replace it with a new one. If it is broken, then you need to check your hub to see if there is any piece of the cable. If so, you should try to get this piece of cable out. Be careful not to damage other parts during this process. Then, loosen the cable connection fitting and pull end of the cable out of the speedometer. With specific remove tools to remove all cable guides on the front forks or the handlebars of your 2013 Hyosung GV650 Aquila Pro .

Step 3: coat the square end of the cable with speedometer cable grease and reattach it to the front wheel speedometer hub. Route the cable to the speedometer’s underside and attach the upper end to speedometer’s fitting. And then tighten the fitting and reattach the speedometer cable guides.

Step 4: Detach the cable underneath the speedometer of your 2013 Hyosung GV650 Aquila Pro . Loosen the nuts on the handlebars and remove the speedometer and remove the back cover from the speedometer.

Step 5: Remove the odometer of your 2013 Hyosung GV650 Aquila Pro and check the gears behind or below the number wheels to see if they are worm badly or not. If so you should replace it with new one.

Step 6: check the back of the speedometer dial to see if it is OK. If accumulated rust or corrosion exists, then you should replace it with a new one. If it is OK, then you can just apply lubricant and then reinstall it back.