Month: January 2015

How to clean radiator for your 1988 Kawasaki ZX400

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1988 Kawasaki ZX400.

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1988 Kawasaki ZX400. You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1988 Kawasaki ZX400. Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1988 Kawasaki ZX400 with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1988 Kawasaki ZX400.

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GPZ500S

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GPZ500S.

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GPZ500S. You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GPZ500S. Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GPZ500S with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GPZ500S.

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GPX250R

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GPX250R.

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GPX250R. You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GPX250R. Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GPX250R with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GPX250R.

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GPZ750R

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GPZ750R .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GPZ750R . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GPZ750R . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GPZ750R with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GPZ750R .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GPX500R

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GPX500R .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GPX500R . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GPX500R . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GPX500R with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GPX500R .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GTR1000

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GTR1000 .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GTR1000 . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GTR1000 . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GTR1000 with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GTR1000 .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki GPX750R

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki GPX750R .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki GPX750R . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki GPX750R . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki GPX750R with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki GPX750R .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki KZG1300

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki KZG1300 .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki KZG1300 . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki KZG1300 . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki KZG1300 with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki KZG1300 .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki ZL250 Eliminator

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki ZL250 Eliminator .

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki ZL250 Eliminator . You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki ZL250 Eliminator . Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki ZL250 Eliminator with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki ZL250 Eliminator .

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.

How to clean radiator for your 1989 Kawasaki VN750 Vulcan

Cleaning out motorcycle radiator is one of most important regular maintenance items. A dirty radiator will cause ineffective running of coolant around your engine and lead to blockage and damage your engine further. In this article, we will tell you how to flush the radiator for your 1989 Kawasaki VN750 Vulcan.

Step 1: remove parts attached to your radiator with your wrench: drain bolts, bleeder bolt and gas tank etc. These parts may affect the process of flushing it. Check your owner’s manual to see where your radiator locates.

Step 2: place a container under the radiator of your 1989 Kawasaki VN750 Vulcan. You should control the distance between the container and your radiator in order to hold coolant and water.

Step 3: remove the cap of the radiator of your 1989 Kawasaki VN750 Vulcan. Check your owner’s manual to see how to remove it. For some brands and models, it needs to be screw out while for other it need to be pressed in first and then it will unlock. Be careful! Coolant will drain out and enter into the container your have just placed beneath the radiator. Dump the coolant into a resealable container in order to dispose it reasonably.

Step 4: insert the bolts back and fill the radiator of your 1989 Kawasaki VN750 Vulcan with water and loosen all the bolts again with your screw wrench to drain the water out. And then you should do this process for one or more times until the water draining out become clear. Now, the flushing work finished.

Step 5: add coolant or 50/50 mixture of antifreeze and distilled water into the radiator with a help of funnel. Remove the bleeder bolt once again and start your engine to pop out air pockets. And keep it run for several minutes to make it warm enough to open the thermostat and cycle the antifreeze through the engine. Now, you can turn off your 1989 Kawasaki VN750 Vulcan.

Step 6: all more coolant or 50/50 mixture of antifreeze and distilled water until it reaches the line reads Full. Tighten all bolts and reattach the cap.

Step 7: clean outside of your radiator carefully.